Hazard Sky

* Made to Order   3-5 business day lead time for Texture Black. 5-7 for color matched *

This adapter plate allows mounting of a winch fairlead to be center mounted to Mopar factory steel bumpers, covering the extra openings.

Precision waterjet cut from 3/16" aircraft grade 6061 aluminum, and powder coated for durability. Comes standard with our signature texture black metallic, or can be color matched or custom coated. Don't see the color you're looking for? Shoot us an e-mail for a custom quote.

- A note on color matching:
While we make every effort to find a precise match for every factory paint color, there may be slight differences in color due to variations in factory paint batches, and wear of the paint and clear coat over time

** Lead time of 7-10 business days**

Front Lift Height	2"
Rear Lift Height	1.7"

 

Take your KL Cherokee to new heights and level out the stance with this 2" leveling kit. 2" of lift in the front with included measuring spacer, replacement hardware, reinforcement collars, and 1.7" of lift in the rear with an aluminum bottom spring seat spacer and UHMW upper isolator spacer raises the vehicle, and slightly evens out forward rake. The leveling may be subtle, but still retains factory performance while carrying heavy gear or towing. For those looking for more of a leveling effect, the rear upper spacer can be omitted for a 1" total rear lift.

 

 

Compatible with all trims of KL Cherokee years 2014-2021

These soft shackles are a great addition to any recovery kit. 11/16 thick fully synthetic rope, with a break rating at 34k lbs, and a nylon sleeve to lessen wear. It even floats!

* Kits are shipping in 3-5 days *

 

For all models of KL Cherokee 2014-2019+, this kit provides 1.5" of lift.

The lift is achieved by adjusting the strut and mount in the front of the vehicle, and adding spacers to the rear spring. This allows for a 1.5" lift, and allows for larger tires. most 30.5" tires will fit with no other modifications, and up to 32" tires can be fit with some trimming and modification in the wheel wells.

For FWD or Active Drive I vehicles, the Rear Wheel Centering kit may be needed if tires larger than 30" are used. 

All parts are custom made for the vehicle, and made from high quality parts. 

The kit includes waterjet cut UHMW-PE upper spacers and Powder Coated Aluminum lower spacers, a vehicle specific front strut spacing tool, and high grade replacement hardware. 

All kits include a full-color installation guide.

 

Optionally, include the Lift Reinforcement Kit.

While not necessary, this optional reinforcement kit provides a bit of extra piece of mind when pushing your lift to the limits on the trails.

Made from 2024 Aluminum, and powder coated for a durable finish.

 

Kit includes:

One collar clamp for each front strut placed above the knuckle, to help limit forces placed on the strut during downward motion.

A Stainless set screw for each rear lower spring isolator, to extend the alignment peg past the spacer, ensuring proper alignment is kept during motion. An Allen key for the set screw is included.

Give your ride a fresh look and cut down on hood glare with this precision cut vinyl decal. Cut from premium Avery vinyl.

Applies to Rubicon style hood.