Universal

Hey, things happen. Cover up that small oops with a vinyl band aid decal roughly 1"x3"

These soft shackles are a great addition to any recovery kit. 11/16 thick fully synthetic rope, with a break rating at 34k lbs, and a nylon sleeve to lessen wear. It even floats!

First Original Light Cube Small 3 in x 3 in. Cube Produces Either 1568 Or 3096 Lumens D2s Provide A Huge Amount Of Light Compact Package More Cooling Surface Than Any Equivalent Sized Light Hyperspot Has 93000 Candela Peak Beam Intensity

D-Series Dually D2 Driving LED Light; Surface Mount; Specter; 6 White; LEDs; Set Of 2;

122 Degree Horizontal Beam For Maximum Coverage Same Great Construction/Durability As RIGIDs Legacy D-Series® Available Single Dual Side Shooter Optic Available Pairs Single Sided Side Shooter Optics On Left/Right IP68 Compliant Dust/Water Ingress Waterproof Deutsch Connector Patented Technology Unbreakable Polycarbonate Lens Powder Coated Aluminum Housing Limited Lifetime Warranty

FEATURES
-2 x 3" 12W C-SERIES C3 LED lights
-Die-Cast Aluminum Housing
-90° Flood Beam Pattern Optics
-On-Board Thermal Management for Light Efficiency

LIGHT PERFORMANCE (PER LIGHT)
-Raw Lumens: 1,080 lm
-Lux @ 10 Meters: Flood- 55 lx
-Candela: Flood- 5,500 cd
-Beam Distance (meters): Flood- 148m

SPECIFICATIONS (PER LIGHT)
-Wattage: 12W
-LED Source: CREE XBD
-Color Temperature: 6000K
-Amp Draw: 1.10A
-Voltage: 9V-32V
-IP Rating: IP67
-Product Dimensions: W - 3.22" x H - 3.42" x D - 3.14"

PARTS INCLUDED
-(2) C3 LED Lights
-Deluxe Wiring Harness
-Die-Cast Mounting Brackets with hardware

PERFORMANCE OUTPUT AND CLARITY
The C-Series LED C3 lights use a forward facing CREE LED design delivering 1,080 Lumens of output with maximum power efficiency. They are perfect for front bumper, windshield, grille, and reverse light applications.

HIGH PERFORMANCE MEETS AFFORDABILITY
C-Series LED C3 lights feature a die-cast aluminum housing, aluminum core PCBs with thermal management, and lexan lenses. What you get is a perfect balance of affordable performance with maximum efficiency, stability and reliability.

SPOT OR FLOOD BEAM PATTERNS
Flood Beam- Provides a large pattern of light utilizing a vertical and horizontal beam pattern, illuminating over short distances in low visibility conditions. These are perfect as rear back up lights in at night and low lighting conditions.

DESIGNED FOR DURABILITY
Off-road race tested, the C-Series LED was designed to handle the harshest environments. Featuring an IP67 rated housing with on-board Thermal Management for maximum light output and efficiency.

FEATURES
-2 x 10W KC FLEX™ Single LEDs
-Die-Cast Aluminum Housings
-KC Precision Reflector Optics
-Patent Pending Pass Through Power Bus
-Spread Beam Pattern

LIGHT PERFORMANCE (PER LIGHT)
-RAW Lumens: 975 lm
-LUX @ 10 meters: Spread- 170 lx
-Candela: Spread- 17,000 cd
-Beam Distance (Meters): Spread- 261m

SPECIFICATIONS (PER LIGHT)
-Wattage: 10W
-LED Source: CREE
-Amp Draw: .83A
-Voltage: 9V-18V
-IP Rating: IP68
-Product Dimensions: W - 2.25" x H - 2.45" x D - 2.92"

Parts in every pair pack system
-(2) 10W KC FLEX™ Single LED Lights
-Wiring Harness w/ 2-Pin weatherproof connectors
-30 Amp LED Switch w/ Panel

OPTICAL PERFORMANCE AND LED EFFICIENCY
Combining KC precision injected reflector optics and efficient LEDs to deliver 250 lx @10m of race performance light output and optical clarity.

EXPANDABILITY FOR CUSTOM LIGHT ARRAYS
Designed to link and stack vertically or horizontally to create custom array shapes and sizes. Comes complete with a u-bracket that mounts KC FLEX LEDs easily in tight spaces.

PASS THROUGH POWER BUS
Patent pending Power Backplane to streamline linking of KC FLEX LED configurations by simplifying wiring setups.

AVAILABLE BEAM PATTERN AND ADVANTAGES
Spread Beam- Provides a wider beam of light that increases peripheral lighting for an improved range of visibility.

BAJA 1000 RACE TESTED STRENGTH & DURABILITY
Using an IP68 rated Die-Cast Aluminum Housing with a hard coated polycarbonate lens, tested by race teams for extreme durability in harsh terrains.

Kit includes 10 .5” spacers, made to fit between mounting points and light brackets. These spacers can be used individually, or stacked, as desired, allowing for better angles and beam pattern, or allowing clearance for roofs or hoods.