This kit utilizes 4 custom spacers to adjust rear trailing link angles and re-center the rear wheels after lifting. This moves the rear wheel towards the rear of the vehicle by approximately 1/2"
Made from 6061 billet aluminum and finished with a textured black powder coat.
KL Cherokee 2" Leveling Kit
** Lead time of 3-5 business days**
Front Lift Height
Rear Lift Height
Take your KL Cherokee to new heights and level out the stance with this 2" leveling kit. 2" of lift in the front with included measuring spacer, replacement hardware, and reinforcement collars, and 1.7" of lift in the rear with an aluminum bottom spring seat spacer and UHMW upper isolator spacer raises the vehicle, and slightly evens out forward rake. The leveling may be subtle, but still retains factory performance while carrying heavy gear or towing. For those looking for more of a leveling effect, the rear upper spacer can be omitted for a 1" total rear lift.
All kits include a set of reinforcement collar spacers. For a cosmetic upgrade, choose to add a second set of collars to completely cover the gap between the knuckle and brake line flange
Compatible with all trims of KL Cherokee years 2014-current.
KL Cherokee 1.5" Lift Kit
* Lead time average of 3-5 business days *
For all models of KL Cherokee 2014-2019+, this kit provides 1.5" of lift.
The lift is achieved by adjusting the strut and mount in the front of the vehicle, and adding spacers to the rear spring. This allows for a 1.5" lift, and allows for larger tires. most 30.5" tires will fit with no other modifications, and up to 32" tires can be fit with some trimming and modification in the wheel wells.
For FWD or Active Drive I vehicles, the Rear Wheel Centering kit may be needed if tired larger than 30" are used.
All parts are custom made for the vehicle, and made from high quality parts.
The kit includes waterjet cut UHMW-PE upper spacers and Powder Coated Aluminum lower spacers, a vehicle specific front strut spacing tool, and high grade replacement hardware.
All kits include a full-color installation guide.
Optionally, include the Lift Reinforcement Kit.
While not necessary, this optional reinforcement kit provides a bit of extra piece of mind when pushing your lift to the limits on the trails.
Made from 2024 Aluminum, and powder coated for a durable finish.
One collar clamp for each front strut placed above the knuckle, to help limit forces placed on the strut during downward motion.
A Stainless set screw for each rear lower spring isolator, to extend the alignment peg past the spacer, ensuring proper alignment is kept during motion. An Allen key for the set screw is included.
KL Front Tow Hooks for non-Trailhawk
Now available for 2019+ models!
This recovery system uses steel to replace the aluminum "frame extensions" that are mounted to the frame below the bumper. The product is designed to fit using existing bolt points in the frame, so NO drilling or other modifications to the frame of the vehicle are necessary. The purchaser will have to cut the honeycomb grille for the hooks to fit, and it will be up to the purchaser if they would like to contour-cut the grille to fit, or simply cut out the entire section.
The kit will come with two steel brackets, two hooks, and hardware to attach the hooks to the brackets. The brackets attach to the frame using the existing bolts that are currently holding the "frame extensions". The brackets will come powder coated in a textured black.
The hooks themselves are available in black or red powder coat. Other custom colors are available for between $10 and $15. Contact us prior to ordering for a quote.
*Parts typically are made to order, and can take 2-3 weeks to ship*
KL/MP Pod Light Mounts
**Kits are made to order and shipping in 2-3 business days**
Light up the trails with these simple Pod Light mounts.
Designed to work with most 4” cube style lights with 5/16” mounting hardware, these mounts connect to a factory mounting point to get your lights up and running with a clean look. The mounting platform is adjustable to account for varied light sizes, and to ensure no collision with the hood when opened.
Kit includes two mounts.
Made from 6061 Aluminum, powder coated with our Hazard Texture Black, and stainless steel hardware, these mounts are designed to last and look great.
To install, some cutting of the rubber between the windshield and fender is required. This item is easily replaced for a fairly small cost from any jeep dealership in the event the vehicle needs to be returned to stock. Compatible with New Jeep Compass 2017.5 and up, and 2014-2020 Jeep Cherokee
Pod Lights not included
Jl/JT Fender Vent Blackout Decal
High quality vinyl decal to add some flair to your vehicle. Matte Black.