* Next batch is in progress, please allow up to 2-3 weeks for manufacturing time *
These mounting brackets allow for easy no-drill installation of a 42" curved light bar to your KL Cherokee.
Laser cut from sturdy 14ga cold rolled steel, and powder coated in a textured black for a durable rugged look, all made in USA from start to finish
KL/MP Pod Light Mounts
**Kits are made to order. Due to current demand and material shortages there is a 2-3 week current lead time**
Light up the trails with these simple Pod Light mounts.
Designed to work with most 4” cube style lights with 5/16” mounting hardware, these mounts connect to a factory mounting point to get your lights up and running with a clean look. The mounting platform is adjustable to account for varied light sizes, and to ensure no collision with the hood when opened.
Kit includes two mounts.
Made from 6061 Aluminum, powder coated with our Hazard Texture Black, and stainless steel hardware, these mounts are designed to last and look great.
To install, some cutting of the rubber between the windshield and fender is required. This item is easily replaced for a fairly small cost from any jeep dealership in the event the vehicle needs to be returned to stock. Compatible with New Jeep Compass 2017.5 and up, and 2014-2020 Jeep Cherokee
Pod Lights not included
KC FLEX™ LED - Single - 2-Light System - 10W Spread Beam - #269
FEATURES -2 x 10W KC FLEX™ Single LEDs -Die-Cast Aluminum Housings -KC Precision Reflector Optics -Patent Pending Pass Through Power Bus -Spread Beam Pattern
SPECIFICATIONS (PER LIGHT) -Wattage: 10W -LED Source: CREE -Amp Draw: .83A -Voltage: 9V-18V -IP Rating: IP68 -Product Dimensions: W - 2.25" x H - 2.45" x D - 2.92"
Parts in every pair pack system -(2) 10W KC FLEX™ Single LED Lights -Wiring Harness w/ 2-Pin weatherproof connectors -30 Amp LED Switch w/ Panel
OPTICAL PERFORMANCE AND LED EFFICIENCY Combining KC precision injected reflector optics and efficient LEDs to deliver 250 lx @10m of race performance light output and optical clarity.
EXPANDABILITY FOR CUSTOM LIGHT ARRAYS Designed to link and stack vertically or horizontally to create custom array shapes and sizes. Comes complete with a u-bracket that mounts KC FLEX LEDs easily in tight spaces.
PASS THROUGH POWER BUS Patent pending Power Backplane to streamline linking of KC FLEX LED configurations by simplifying wiring setups.
AVAILABLE BEAM PATTERN AND ADVANTAGES Spread Beam- Provides a wider beam of light that increases peripheral lighting for an improved range of visibility.
BAJA 1000 RACE TESTED STRENGTH & DURABILITY Using an IP68 rated Die-Cast Aluminum Housing with a hard coated polycarbonate lens, tested by race teams for extreme durability in harsh terrains.
Rigid D-Series Dually D2 Driving LED Light
First Original Light Cube Small 3 in x 3 in. Cube Produces Either 1568 Or 3096 Lumens D2s Provide A Huge Amount Of Light Compact Package More Cooling Surface Than Any Equivalent Sized Light Hyperspot Has 93000 Candela Peak Beam Intensity
D-Series Dually D2 Driving LED Light; Surface Mount; Specter; 6 White; LEDs; Set Of 2;
Rigid Dually Side Shooter LED Driving Light Cube
122 Degree Horizontal Beam For Maximum Coverage Same Great Construction/Durability As RIGIDs Legacy D-Series® Available Single Dual Side Shooter Optic Available Pairs Single Sided Side Shooter Optics On Left/Right IP68 Compliant Dust/Water Ingress Waterproof Deutsch Connector Patented Technology Unbreakable Polycarbonate Lens Powder Coated Aluminum Housing Limited Lifetime Warranty
KC HiLites 3" C-Series C3 LED - 2-Light System - 12W Flood Beam - #332
FEATURES -2 x 3" 12W C-SERIES C3 LED lights -Die-Cast Aluminum Housing -90° Flood Beam Pattern Optics -On-Board Thermal Management for Light Efficiency
SPECIFICATIONS (PER LIGHT) -Wattage: 12W -LED Source: CREE XBD -Color Temperature: 6000K -Amp Draw: 1.10A -Voltage: 9V-32V -IP Rating: IP67 -Product Dimensions: W - 3.22" x H - 3.42" x D - 3.14"
PARTS INCLUDED -(2) C3 LED Lights -Deluxe Wiring Harness -Die-Cast Mounting Brackets with hardware
PERFORMANCE OUTPUT AND CLARITY The C-Series LED C3 lights use a forward facing CREE LED design delivering 1,080 Lumens of output with maximum power efficiency. They are perfect for front bumper, windshield, grille, and reverse light applications.
HIGH PERFORMANCE MEETS AFFORDABILITY C-Series LED C3 lights feature a die-cast aluminum housing, aluminum core PCBs with thermal management, and lexan lenses. What you get is a perfect balance of affordable performance with maximum efficiency, stability and reliability.
SPOT OR FLOOD BEAM PATTERNS Flood Beam- Provides a large pattern of light utilizing a vertical and horizontal beam pattern, illuminating over short distances in low visibility conditions. These are perfect as rear back up lights in at night and low lighting conditions.
DESIGNED FOR DURABILITY Off-road race tested, the C-Series LED was designed to handle the harshest environments. Featuring an IP67 rated housing with on-board Thermal Management for maximum light output and efficiency.